Quick start function: simplify the operation steps, press the start key twice to execute the program before the last shutdown.
Emergency stop interlock protection: the manipulator and the ejector, either side has emergency treatment, both have interlock protection.
Safety door interlock protection: the safety door can control the mode closing command of the ejector and the action of the manipulator. If the manipulator fails to retrieve the object, the safety door can be reset after troubleshooting.
Automatic mode determination: when the manipulator automatically executes the program, it will detect whether the ejector is in automatic operation mode.
Detection and classification of defective products: (1) It can assist the judgment of defective products. (2) it can separate defective products from normal products.
Inspection procedure: the inspection times can be set and placed in the waiting area during operation.
If the finished product cannot be ejected, the manipulator can give an alarm and display it on the screen.
Inspection product positioning setting: the set inspection products can be placed on different positioning points.
Mold plate detection: with mold sensor detector, it is a safety system to prevent abnormal mold from colliding with manipulator.
Ten sets of standard program memory: users can use the manipulator quickly and simply without pre editing the action flow.
Ten groups of teaching program memory: with the function of fixture, you can edit the required actions at will and save them permanently.
Full key operating system: directly used in each action function operation key.
One set of reserved input: This machine provides one set of reserved input, such as electric eye signal input of conveyor belt.
